Open topic with navigation
2nd Order using Appendix 2
In case the proper setting is activated in the steel setup, the provisions according to article 2.1 of Appendix 2 are applied.
More specifically, when the check is executed for a non-linear combination the following changes are applied:
- Effective length factor Kx is set to 1,00
- Effective length factor Ky is set to 1,00
- αx for article C5.2 is taken as 1,00
- αy for article C5.2 is taken as 1,00
- Cmx for article C5.2 is taken as 1,00
- Cmy for article C5.2 is taken as 1,00
Article 2.2 of Appendix 2 is not supported.
Open topic with navigation