Open topic with navigation

Defining a new internal edge

Procedure for the definition of a new internal edge

1. Open function plane Internal edge:

   1. either use menu function Tree > Structure > Internal edge,

   2. or open tree menu service Structure and call function Plane component > Internal edge.

2. Input and adjust the required parameters.

3. Confirm with [OK].

4. Select the slab where the internal edge is to be inserted.

5. Press [Esc].

6. Input the starting and end point of the internal edge.

7. Close the function.

Note: As soon as the function is invoked and the master slab selected, working plane is automatically moved to the plane of the selected master slab. When the definition of the slab-component is over, the working plane returns back to its original position.

Open topic with navigation