Open topic with navigation

Defining a new plate

Procedure for the definition of a new plate

1. Open function Plane slab:

   1. either use menu function Tree > Structure > Plane slab,

   2. or open tree menu service Structure and call function Plane slab.

2. Input and adjust the required parameters.

3. Confirm with [OK].

4. Input individual vertices of the slab.

5. Close the function.

Note : If two overlapping slabs are input, the question that arises is "what property should be assigned to the intersection of the two slabs?" The answer is simple: "The parameters of the later input slab are those of the highest priority."

Open topic with navigation