Open topic with navigation

Editing the circular arc angle

A defined circular arc may be edited afterwards if such a need arises. It is possible to edit the arc’s angle, the arc's bulge, and the arc's radius.

The procedure for the modification of the angle of a circular arc

1. Open function Edit arc angle:

   1. either click button [Geometrical manipulations with curves] > [Edit arc angle] (> ) on toolbar Geometrical manipulations,

   2. or use menu function Modify > Curves edit > Edit curve – arc by angle.

2. Select the arcs that should be edited. It is possible to select and edit multiple arcs at time.

3. Press [Esc] key to end the selection.

4. The editing dialogue is opened on the screen.

5. Type the new value.

6. Confirm with [OK] button.

7. The modification of the shape is made accordingly.

Note: If any entities are selected prior to calling this function, the function itself does not require making of any other selection. The function is applied on the selection made beforehand.

Open topic with navigation