Open topic with navigation

Enlarging the entities

The function extends the selected entities by a given value.

The procedure for the enlarging of entities

1. Start function Enlarge by defined length:

   1. either call menu function Modify > Enlarge by defined length,

   2. or click button [Enlarge by defined length] () on toolbar Geometrical manipulations,

2. In the dialogue that appear on the screen, type the value by which the selected entities should be enlarged.

3. Select entities that should be enlarged.

4. Press [Esc] to end the function.

Note: If any entities have been selected prior to calling this function, the selection is stored by the computer and cleared. All the selections necessary for the successful performance of the function must be made from within the function according to the instructions given on the command line. Once the function is closed, the original selection is restored.

Open topic with navigation