Open topic with navigation

Modifying the connection of intersecting entities

Any defined cross-link can be edited if required. Any of its parameters can be reviewed or changed.

The procedure for the modification of cross-link properties

1. Select the cross-link you need to modify.

2. The cross-link parameters are displayed in the Property window.

3. Modify any parameter you need to.

4. The modification is immediately taken into account.

5. Clear the selection.

Note 1: It is possible to modify several nodes at a time. The user must be aware of that the change made in the Property window will be applied to all selected nodes.

Note 2: The Property window shows among others the 1D members that are connected in the selected cross-link.

Open topic with navigation