|
||
|
|
||
The Trim function trims the selected entities according to the specified "trimming" entity.
Start function Trim:
either call menu function Modify > Trim,
or
click button [Trim] (
)
on toolbar Geometrical manipulations,
Select entities to which the other ones should be trimmed.
Select entities that should be trimmed (i.e. shortened).
Press [Esc] to end the function.
Note: If any entities have been selected prior to calling this function, the selection is stored by the computer and cleared. All the selections necessary for the successful performance of the function must be made from within the function according to the instructions given on the command line. Once the function is closed, the original selection is restored.
Example:
|
before trimming |
after trimming |
|
|
|
