Adjusting dot grid parameters

The dot grid can be adjusted to meet the needs of a particular project. Sometimes, it may be good idea to re-adjust the grid settings from time to time, especially if the geometry of the whole structure is not regular and varies from one part to another.

The procedure to adjust dot grid parameters

  1. Open the Dot grid setting dialogue:

    1. Either using toolbar View and its button [Setting of the dot grid] (image\Icon_Dot_grid.gif),

    2. Or via menu function Tools > Dot grid settings

  2. Select the required type of the grid: orthogonal or radial

  3. Type in the parameters of the grid (the individual parameters are self-explicable).

  4. Close the dialogue.

image\Dlg_Dot_grid.gif

  1. The adjusted grid will be displayed on the screen unless it is switched off.