Editing the circular arc bulge

A defined circular arc may be edited afterwards if such a need arises. It is possible to edit the arc's angle, the arc’s bulge, or the arc's radius.

The procedure for the modification of the bulge of a circular and parabolic arc

1. Open function Edit arc bulge:

   1. either click button [Geometrical manipulations with curves] > [Edit arc bulge] (> ) on toolbar Geometrical manipulations,

   2. or use menu function Modify > Curves edit > Edit curve – arc by bulge.

2. Select the arcs that should be edited. It is possible to select and edit multiple arcs at time.

3. Press [Esc] key to end the selection.

4. The editing dialogue is opened on the screen.

5. Type the new value.

6. Confirm with [OK] button.

7. The modification of the shape is made accordingly.

Note: If any entities are selected prior to calling this function, the function itself does not require making of any other selection. The function is applied on the selection made beforehand.