Refresh of results

In order to refresh (regenerate the display of) results on the screen a special Action button is located in the Property Window of SCIA Engineer user interface. This button is called Refresh.

image\Refresh_PropWin.gif

The procedure for refresh of results on the screen

  1. Open service Results.

  2. Select required function (e.g. Internal forces on beam, deformation of nodes, etc.)

  3. In the Property Window, select required load case or combination, quantity and adjust other parameters defining the display style.

  4. When finished with the settings, press Action button [Refresh].

  5. The screen is regenerated.

  6. Evaluate the displayed diagrams.

  7. When finished, select another result quantity and / or change the display settings and press Action button [Refresh] again.

  8. The screen is regenerated once more in order to reflect the latest adjustment.

  9. Repeat steps 7 to 8 as many times as reguired.

Note: Whenever a change made in the Property Window requires a subsequent refresh of the screen, item Refresh in Action buttons is highlighted in red.

Default keyboard shortcut - F5

image\Refresh_Ex_7.gif