Material properties
The characteristic values of the material properties are based on Table 3.2a for wrought aluminium alloys of type sheet, strip and plate and on Table 3.2b for wrought aluminium alloys of type extruded profile, extruded tube, extruded rod/bar and drawn tube.
The following alloys are provided by default:
|
EN-AW 5083 (Sheet) O/H111 (0-50) EN-AW 5083 (Sheet) O/H111 (50-80) EN-AW 5083 (Sheet) H12 (0-40) EN-AW 5083 (Sheet) H22/H32 (0-40) EN-AW 5083 (Sheet) H14 (0-25) EN-AW 5083 (Sheet) H24/H34 (0-25) EN-AW 5083 (ET,EP,ER/B) O/111,F,H112 (0-200) EN-AW 5083 (DT) H12/22/32 (0-10) EN-AW 5083 (DT) H14/24/34 (0-5) EN-AW 5454 (ET,EP,ER/B) O/H111,F/H112 (0-25) EN-AW 5754 (ET,EP,ER/B) O/H111,F/H112 (0-25) EN-AW 5754 (DT) H14/H24/H34 (0-10) EN-AW 6005A (EP/O,ER/B) T6 (0-5) EN-AW 6005A (EP/O,ER/B) T6 (5-10) EN-AW 6005A (EP/O,ER/B) T6 (10-25) EN-AW 6005A (EP/H,ET) T6 (0-5) EN-AW 6005A (EP/H,ET) T6 (5-10) EN-AW 6060 (EP,ET,ER/B) T5 (0-5) EN-AW 6060 (EP) T5 (5-25) EN-AW 6060 (ET,EP,ER/B) T6 (0-15) EN-AW 6060 (DT) T6 (0-20) EN-AW 6060 (EP,ET,ER/B) T64 (0-15) EN-AW 6060 (EP,ET,ER/B) T66 (0-3) EN-AW 6060 (EP) T66 (3-25) EN-AW 6061 (EP,ET,ER/B) T4 (0-25) EN-AW 6061 (DT) T4 (0-20) EN-AW 6061 (EP,ET,ER/B) T6 (0-25) EN-AW 6061 (DT) T6 (0-20) EN-AW 6063 (EP,ET,ER/B) T5 (0-3) |
EN-AW 6063 (EP) T5 (3-25) EN-AW 6063 (EP,ET,ER/B) T6 (0-25) EN-AW 6063 (DT) T6 (0-20) EN-AW 6063 (EP,ET,ER/B) T66 (0-10) EN-AW 6063 (EP) T66 (10-25) EN-AW 6063 (DT) T66 (0-20) EN-AW 6082 (Sheet) T4/T451 (0-12.5) EN-AW 6082 (Sheet) T61/T6151 (0-12.5) EN-AW 6082 (Sheet) T6151 (12.5-100) EN-AW 6082 (Sheet) T6/T651 (0-6) EN-AW 6082 (Sheet) T6/T651 (6-12.5) EN-AW 6082 (Sheet) T651 (12.5-100) EN-AW 6082 (EP,ET,ER/B) T4 (0-25) EN-AW 6082 (EP/O,EP/H) T5 (0-5) EN-AW 6082 (EP/O,EP/H,ET) T6 (0-5) EN-AW 6082 (EP/O,EP/H,ET) T6 (5-15) EN-AW 6082 (ER/B) T6 (0-20) EN-AW 6082 (ER/B) T6 (20-150) EN-AW 6082 (DT) T6 (0-5) EN-AW 6082 (DT) T6 (5-20) EN-AW 7020 (Sheet) T6 (0-12.5) EN-AW 7020 (Sheet) T651 (0-40) EN-AW 7020 (EP,ET,ER/B) T6 (0-15) EN-AW 7020 (EP,ET,ER/B) T6 (15-40) EN-AW 7020 (DT) T6 (0-20) EN-AW 8011A (Sheet) H14 (0-12.5) EN-AW 8011A (Sheet) H24 (0-12.5) EN-AW 8011A (Sheet) H16 (0-4) EN-AW 8011A (Sheet) H26 (0-4) |
The default HAZ values are applied. As such, footnote 2) of Table 3.2a and footnote 4) of Table 3.2b are not accounted for. The user can modify the HAZ values according to these footnotes if required.