Drawing setup 1D

How the standard results for 1D members can be displayed, is set in Drawing setup 1D. This setting is accessible from any 1D results and 1D checks which deals with 1D results.

Extreme label has multiple options of enabling different characteristics of the result.

Usage

Calculate a FEM analysis of the model
Go to for exampleTree > Results > Beams > 1D internal forces
Set properties of the command and refresh for specific drawing setup

Properties

Category	Property	Description / Notes
Drawing Setup 1D	Display value name On / Off
	Display values On / Off
	Display units On / Off
	Display case On / Off
	Display section dx On / Off
	Display combination key On / Off
	Display combination name On / Off
	Set limit values On / Off	This settings is available not for basic results, but for 1D checks (like steel check). Set limit values - colour change for check
	Colour scheme One colour/ Rainbow / Defined by result	Different colour schemes may be used to display 1D results.
	Graph type Base line / Graph / Hatched / Filled / Filled light / Filled transparent
	Envelopes drawing 0 to extreme / min to max	Envelopes may be drawn to show both minimal and maximal value of result in each section. If the minimal value of result is not required, setting 0-extreme shows only absolute extreme in each section.
	Course Precise / trapezoidal / Average	This possibility is available only for service Reaction for displaying linear intensities on line supports. Precise : It is taken from nodal reactions of support based on mesh size. Average : It is resultant of current reaction divided by length. Trapezoidal : Interpolation of precise reactions by "the least squares method".
	Label colour by graph On / Off	Label may be coloured either by the colour of graph or drawn in one colour (black). When drawn in one colour both the minimal and maximal vales will be drawn in the same style.
	Drawing plane 3D / Screen	More component could be displayed by 2 different ways. Displaying more components in 3D allows to clearly see e.g. bending moment in both directions together both drawn in respect of system line of the 1D member.
	Label orientation Perpendicular to axis / Parallel with axis