Defining a new section for display of results

Procedure to define a new section on a 1D member

1. Open service Structure.

2. Start function Model data > Section on beam.

3. Adjust the section parameters.

4. Confirm with [OK].

5. Select the 1D members where the section / sections should be defined.

6. Close the function.

7. Close the service.

Procedure to define a new section on a slab

1. Open service Results.

2. Start function 2D Members > Section on 2D member.

3. Adjust the section parameters.

4. Confirm with [OK].

5. Define the section by its starting and end point.

6. Close the function.

7. Close the service.