| Old setting name |
New setting name |
Remarks |
| Main functionality settings (left hand side panel)
|
|
Dynamics
|
|
no change
|
| Initial stress |
|
(1) standard, hidden and always enabled |
| Subsoil |
|
(1) standard, hidden and always enabled |
| Nonlinearity |
|
(2) enabled by default |
| Stability |
|
no change
|
|
Climatic loads |
|
(2) enabled by default (only for codes that
support climatic loading 'according to code') |
| Prestressing |
|
no change
|
| Pipelines |
|
(4) deprecated |
| Structural model |
|
(2) enabled by default |
| BIM properties |
IFC properties |
|
| Parameters |
Parametric input |
|
| Mobile loads |
|
no change
|
| Automated GA drawings |
|
(1) standard, hidden and always enabled |
| CADS composite checks |
CADS Composite add-on |
|
| External application checks |
Excel checks |
|
| Slabs with void formers |
|
no change
|
| Property modifiers |
|
no change
|
| Bridge design |
|
no change
|
| Document |
|
no change
|
| Advanced concrete checks |
|
no change
|
| Dynamics settings group |
| |
Modal & harmonic analysis |
(5) new setting, added for clarity |
| Seismic |
Seismic spectral analysis |
no change
|
| General dynamics |
Dynamic time-history analysis |
no change
|
| Non proportional damping |
Non-proportional damping |
no change
|
| Nonlinearity settings group |
| Beam local nonlinearity |
|
(2) enabled by default |
| Support nonlinearity/Soil spring |
Support nonlinearity/Basic soil spring |
(2) enabled by default |
| Initial deformations and curvature |
Initial imperfections |
(2) enabled by default |
| Geometrical nonlinearity |
|
no change
|
| General plasticity |
|
no change
|
| Press only 2D members |
Compression-only 2D members |
|
| Cable |
Cables |
|
| Friction support/Soil spring |
|
no change
|
| Membrane elements |
|
no change
|
| Sequential analysis |
|
no change
|
| Subsoil settings group |
| Soil interaction |
|
no change
|
| Soil loads |
|
(1) standard, hidden and always enabled |
| Pad foundation check |
|
no change
|
| Prestressing settings group |
| Advanced |
|
(5) this setting has been removed; there
is no longer a distinction between 'basic'
and 'advanced' prestressing |
| Steel settings group |
| Plastic hinges |
Plastic hinge analysis |
|
| Fire resistance |
Fire resistance checks |
|
| Frame rigid connections |
Steel connections |
(5) all settings related to steel
connections have been merged into
a new, single setting; limitations due
to licensing still apply |
| Frame pinned connections |
| Grid pinned connections |
| Bolted diagonal connections |
| Hollow section joints |
| Expert system |
| Connection monodrawings |
| Scaffolding |
|
no change
|
| LTB 2nd order |
7DoF 2nd order analysis for LTB |
|
| Girders with sinusoidal webs |
|
no change
|
| ArcelorMittal |
|
(4) deprecated |
| Aluminium settings group |
| Scaffolding |
|
no change
|
| LTB 2nd order |
7DoF 2nd order analysis for LTB |
|
| Concrete settings group |
| 1D physical non-linearity |
|
no change
|
| 2D physical non-linearity |
|
no change
|
| Fire resistance |
Fire resistance checks |
|
| Hollow core slab |
Hollow core slab checks |
|
| Code dependent deflection |
|
(1) standard, hidden and always enabled
(supported only in v17 post-processing environment) |
| Bridge design |
| Load combinations |
|
no change
|
| Concrete checks extension |
|
no change
|
| CADS composite add-on settings group (formerly CADS composite checks) |
| Composite beam |
|
(4) deprecated |
| Composite column |
Composite column checks |
|
| Fire resistance |
Fire resistance checks |
|
