Performing crack control

The procedure to perform the crack control

1. Open service Concrete Advanced.

2. Select function 1D member > Member check > Check of prestressed concrete > Crack control (single click on the function is sufficient to invoke the function).

3. Select the required type of load.

4. Select the required load case, combination or class.

5. Select beams to be checked.

6. Select the required quantity and if required, make other adjustments in the property window.

7. Click Action button [Refresh] to see the selected design values.

8. Repeat steps 3 to 7 as many times as required.

Note: This calculation can be used only for SLS combinations.

Note: This function does not offer Single check action button.