Defining a new point load in a node

The same procedure is applicable for the definition of all nodal point loads, i.e. point force, point moment, translation in node, rotation in node, wind pressure in node, etc.

The procedure for the definition of a new point load in a node

1. Open the required function via tree menu Loads or via menu Tree > Loads:

   1. Point force > in node

   2. Moment > in node

   3. Point displacement > Translation of support

   4. Point displacement > Rotation of support

2. Specify the parameters of the load and its size.

3. Confirm the settings with [OK] button.

4. Select nodes where the load should act.

5. Close the function.