EN 1993-1-5
|
Article |
Commentary |
|---|---|
|
2.2(5) |
The NA may define the parameter No default implementation / Not supported for SCIA Engineer
|
|
3.3(1) |
The NA may choose the method for shear lag No default implementation / Not supported for SCIA Engineer
|
|
4.3(6) |
The NA may define the parameter No default implementation / Not supported for SCIA Engineer
|
|
5.1(2) |
The NA may define the parameter NA data supported in SCIA Engineer
|
|
6.4(2) |
The NA may give additional information No default implementation / Not supported for SCIA Engineer
|
|
8(2) |
The NA may give additional information No default implementation / Not supported for SCIA Engineer
|
|
9.1(1) |
The NA may give additional information No default implementation / Not supported for SCIA Engineer
|
|
9.2.1(9) |
The NA may define the parameter No default implementation / Not supported for SCIA Engineer
|
|
10(1) |
The NA may define the limits of application No default implementation / Not supported for SCIA Engineer
|
|
10(5) |
The NA may give additional information No default implementation / Not supported for SCIA Engineer
|
|
C.2(1) |
The NA may define the conditions No default implementation / Not supported for SCIA Engineer
|
|
C.5(2) |
The NA may define the imperfections No default implementation / Not supported for SCIA Engineer
|
|
C.8(1) |
The NA may define the limit No default implementation / Not supported for SCIA Engineer
|
|
C.9(3) |
The NA may give additional information No default implementation / Not supported for SCIA Engineer
|
|
D.2.2(2) |
The NA may give additional information No default implementation / Not supported for SCIA Engineer
|