EN 1992-2
|
Article |
Commentary |
|---|---|
|
3.1.2 (102)P |
The NA may define the partial factor for shrinkage action NA data supported in SCIA Engineer |
|
3.1.6 (101)P |
The NA may define the partial factor for shrinkage action NA data supported in SCIA Engineer |
|
3.1.6 (102)P |
The NA may define the partial factor for shrinkage action NA data supported in SCIA Engineer |
|
3.2.4 (101)P |
The NA may define the partial factor for shrinkage action NA data supported in SCIA Engineer |
|
4.2 (105) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
4.2 (106) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
4.4.1.2 (109) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
5.1.3 (101)P |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
5.2 (105) |
The NA may define the partial factor for shrinkage action NA data supported in SCIA Engineer |
|
5.3.2.2 (104) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
5.5 (104) |
The NA may define the partial factor for shrinkage action NA data supported in SCIA Engineer |
|
5.7 (105) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
6.1 (109) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
6.1 (110) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
6.2.2 (101) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
6.2.3 (103) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
6.2.3 (107) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
6.2.3 (109) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
6.8.1 (102) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
6.8.7 (101) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
7.2 (102) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
7.3.1 (105) |
The NA may define the partial factor for shrinkage action NA data supported in SCIA Engineer |
|
7.3.3 (101) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
7.3.4 (101) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
8.9.1 (101) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
8.10.4 (105) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
8.10.4 (107) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
9.1 (103) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
9.2.2 (101) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
9.5.3 (101) |
The NA may define the partial factor for shrinkage action NA data supported in SCIA Engineer |
|
9.7 (102) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
9.8.1 (103) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
11.9 (101) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
113.2 (102) |
The NA may define the distance of provided joints for neglect the temperature and shrinkage effects in global analysis No default implementation/Not supported for SCIA Engineer |
|
113.3.2 (103) |
The NA may define the partial factor for shrinkage action NA data supported in SCIA Engineer |