Open topic with navigation
Handling with the function is analogous to Checking of limit strain. The values offered for display are naturally different.
Check value
The result of the check. The value of 1 means that the capacity is fully utilised.
sigma cc,max
Allowable stress of concrete prior and after anchoring/transfer of prestressing.
sigma cc,ch
Allowable stress of concrete in compression under SLS characteristic combination.
sigma cc,qp
Allowable stress of concrete in compression under SLS quasi-permanent combination.
f ct,eff
Allowable stress of concrete in tension under SLS combinations.
sigma c,aa
Stress of concrete after anchoring/transfer of prestressing.
sigma cq,min
Minimum concrete stress after application of self-weight, all permanent, and variable loads.
sigma clt,min
Minimum concrete stress caused by long-term loads.
sigma cq,max
Maximum concrete stress after application of self-weight, all permanent, and variable loads.
sigma clt,max
Maximum concrete stress caused by long-term loads.
sigma c,inc
Stress increment in concrete caused by selected load case.
For the procedure read Performing the check of allowable stress in concrete.