|
||
|
|
||
Any defined linked node can be edited if required. Any of its parameters can be reviewed or changed.
|
Name |
It is used for identification of the node. |
|
Connection |
Says that the node is connected (linked) to an entity. States the "owner" of the node. |
|
Coordinate |
Specifies the co-ordinate type by means of which the position of the node on its "owner" is defined. |
|
Position x |
Defines the position. |
|
LCS |
The node can have its local coordinate system. To define it, at least one UCS must be defined by the user. If it is done, it is possible to coincide the LCS of the node with the required UCS. (see also Defining a local co-ordinate system of a node). |
Select the node you need to modify.
The node parameters are displayed in the Property window.
Modify any parameter you need to.
The modification is immediately taken into account.
Note 1: It is possible to edit the linked node even if it has not been attached to the second entity. Thus e.g. its relative position on the 1D member can be modified.
Note 2: It is possible to modify several nodes at a time. The user must be aware of that the change made in the Property window will be applied to all selected nodes.
Note 3: The Property window shows among others the 1D members that are connected in the selected node.