Displaying the averaged results

In order to activate the averaging algorithm, the user must select the appropriate option in service Results.

Procedure to activate the averaging of internal forces

1. Open service Results.

2. Select function 2D members > Member 2D – Internal forces.

3. In the property Window adjust the required parameters for the display of the results.

4. Select option Averaging of peak (without this option being selected, the results are NOT averaged even when averaging strips have been defined).

5. Refresh the screen.

Procedure to activate the averaging of required reinforcement areas

1. Open service Concrete Advanced.

2. Depending on the needs, select function 2D member > Member design – Design – ULS or 2D member > Member design – Design – crack width.

3. In the property Window adjust the required parameters for the display of the results.

4. Select option Averaging of peak (without this option being selected, the results are NOT averaged even when averaging strips have been defined).

5. Refresh the screen.