Thickness of slabs

The Thickness of slabs command serves for displaying thickness of 2D members in project.

Usage

1. Calculate a FEM analysis of the model
2. Go to Results > Thickness of slabs
3. Set properties of the command to specify mainly:
   • selection of 2D members where the thickness must be displayed
4. Click on [Refresh] action button to display the results

Properties

Category	Property	Description / Notes
Selection	Type of selection All / Current / Advanced / Named Selection	Specifies on what members the results are displayed See "Type of selection"
	Filter No / Material / WildCard / Layer / Thickness
Drawing Setup 2D		"Drawing setup 2D"
Errors, warnings and notes settings		"Errors, warnings and notes settings"

Legend

Two types of legend are automatically available in 3D scene.

If in selection there are only 2D mesh elements with less than 20 different types of thickness - legend with separate values is displayed.

If in selection there is at least one 2D mesh elements with more than 20 different types of thicknesses - legend with rainbow range is displayed.