Basic data tab

The procedure for setting the parameters is the same as for other project parameters.

The basic data of a project describe the project and define some of its main parameters.

Data

This group of items allows the user to enter some statistical data about the project

Name

name of the project

E.g. Eddy Merckx's Airport – Brussel

Part

name of the project part, if the project is complex and consists of several partial sub-projects

E.g. Western hall + connection footbridge

Description

E.g. variant A (underground parking, restaurants on first floor, check-in desks on second floor)

Author

name of the project author

E.g. Sven Nijs

Date

date of the last project modification, or date of the program creation, etc.

E.g. 02/02/02

Structure

Here, the user can choose the type (or we can say "dimension") of the structure you want to model. Depending on the type selected, some of the functions and options of the program may be disabled or hidden (e.g. in the case of 2D frame oriented in plane XZ, the buttons for setting the workplane will not be available). This feature leads to a significant simplification in the operation of the program for simpler types of structures. The functions and options that are not appropriate (are not possible practically) for the particular type are hidden and do not add to the complexity of the program. The idea behind this feature is: a complex task requires a complex tool, but a simple task can get by a simple tool.

Truss XZ

The 1D members of a model are capable of carrying axial forces only. That means that pin ends (hinges) are meaningless, supports do not have rotation degrees of freedom defined and results consists of axial forces only. Only a 2D model can be created.

Frame XZ

The 1D members can represent a planar frame structure. Only a 2D model can be created.

Truss XYZ

This mode is similar to Truss XZ, but a real 3D structure can be created.

Frame XYZ

This option is similar to Frame XZ, but a real 3D structure can be created.

Grid XY

A horizontal grate can be modelled in this mode.

Plate XY

This mode provides for analysis of combined 1D member and slab structure. All the members must be located in a horizontal plane. Only a 2D model can be created.

Wall XY

This mode is similar to Frame XZ mode, but vertical walls can be inserted as well. Only a 2D model can be created.

General XYZ

This option allows the user to model and analyse a 3D structure consisting of any structural members: 1D members as well slabs (plates, walls, shells).

Note: Item Structure is compulsory and the user has to make a choice from the available variants.

Material

This option tells the program which materials will be used for members of the structure. The advantage of this in advance selection is that the program functions working with materials will know, which material the user is interested in. Therefore, the functions will not offer other material types and, consequently, the dialogs, lists and similar items will be lucid and readable as much as possible.

If the user realises later that some other material type is necessary, it is of course possible to call the setting dialogue any time in the future and widen the selection of used material types.

Note: At the beginning, i.e. at the time when a new project is being created, it is necessary to select at least one material type.

Post-processing environment

In the 64-bit version of SCIA Engineer, only post-processing environment "default" is available. In the 32-bit version, also the older post-processing environment "v16 and older" is available (e.g. for construction stages analysis, harmonic analysis,...).

Detailed description can be found in chapter "Default Post-processing environment "

Model

In the 64-bit version of SCIA Engineer, only model type "One" is available. In the 32-bit version, also the model type "Construction stages" is available.

One

the project will contain a single model of a structure

Construction stages

the project will represent modelling of construction stages appearing during the execution of the structure

Code

The selection of the active code determines how the program deals with data related to a specific technical standard. In practice it means that the code selection affects:

Note: The choice of a particular national standard may have an effect on the layout and even functionality of numerous functions. E.g. functions like Load case and Load group have got parameters that depend on the current code of the project. That means that these function offer the user different parameters for e.g. Czech standard than for let’s say Eurocode. Also the functionality of some functions or services is different for different codes.