Opening the service Results
Service Results may be opened after a calculation has been successfully finished.
Service Results can be opened using:
-
tree menu item Results,
-
menu function Tree > Results,
-
icon Results (
)
on toolbar Project.
The service may look like:
As soon as the service is opened in the tree menu window, the Property window is filled with parameters corresponding to active function of service Results. The parameters in the Property window can be used to adjust "WHAT" is displayed and "HOW" it is displayed.
Common parameters are:
|
Specifies what "load type" is considered for the display. Available load types are: |
|
|
For each of the above specified load type a set of available items (load cases, combinations, result classes) is offered. |
|
|
The user may display the results either on all or only selected 1D members. |
|
|
The set of 1D members where the results are displayed may be specified by means of a filter. |
|
|
Values |
For each of the result groups (internal forces, deformations, etc.) a set of quantities id offered for display. The user may select which one is really shown. |
| System |
Some of 1D results enables to specify the coordinate system used for displaying of result values. LCS means local coordinate system of the 1D member. Principal means the local coordinate system of the cross section (see also property Alpha of 1D members and cross section characteristics) |
|
It is possible to adjust the style of the diagrams. |
|
|
Other specific parameters |
Some of the available result groups (internal forces, deformations, etc.) may have other group-specific parameters. |
Note: If a calculation has not been performed yet or the structure has been somehow modified after the calculation has been carried out, service Results is not accessible (to be precise, it is not offered in the tree menu).
Note: The collection of functions offered in the service may vary according to the project type and authorised modules.