Dynamics detailed (results for dynamic analyses)

Since SCIA Engineer v 25, there is a result command, which enables detailed results for all kinds of dynamic analyses (modal, seismic, harmonic), and it is called "dynamics detailed".

General information

The command icon is depicted in the figure below. It is accessible in: "Results" → "Dynamics" → "Dynamics - detailed"; or by default also in the process tool bar in the "results" part.

Some dynamic analysis is required to be calculated in order to use this command (either modal, seismic or harmonic analysis).

The properties of this command depends on the selected "type of load" and corresponding analysis. Three options are available:

A) Detailed results for seismic load case - hence the property "Type of load" = "load cases" ; and "load case" = "some calculated seismic load case"

B) Detailed results for harmonic analysis load case - hence the property "Type of load" = "load cases" ; and "load case" = "some calculated harmonic load case"

C) Detailed results of modal analysis eigenshape - hence the property "Type of load" = "mass combination" ; and "mass combination" = "some calculated combination of mass group along with the selected eigenvalue"

D) Detailed results for Footfall analysis load case - hence the property "Type of load" = "load cases" ; and "load case" = "some calculated footfall load case"

These possibilities are summarized in the figure below, and will be further explained in the following chapters.