Traffic load 2D (train loads) - work flow

This chapter describes the older solution (present also before Scia Engineer v 26.0), which provides option to automatically generate several load cases with varying load position (applicable only for 2D members)

Work flow of the method

In order to use this feature, subsequent actions need to be done:

1) define Traffic lane 2D. Note: same as in case of the new "Mobile load 2D" solution	2) define Traffic Load Patterns	3) set the configuration in Traffic loads generator and generate the corresponding loads	Optional - explicitly define load from the "Traffic load patterns" library into some additional load case, using Single traffic loads

Example is also provided here.